Samsung SCH-R330 Series User Manual page 22

Speed Dialing
Speed Dialing lets you place a call to any Contact stored in your
Contacts list by dialing the Contact's Location number.
1-Touch Dialing (1 – 9)
In Standby mode, press and hold the number key (1 – 9)
corresponding to the desired Contact's speed dial number.
Example: To speed dial the Contact assigned speed dial 5, press and hold
.
2-Touch Dialing (10 – 99)
In Standby mode, enter the first digit of the desired
1.
Contact's speed dial number.
Press and hold the number key representing the second
2.
digit.
Example: To speed dial the Contact assigned speed dial 35, press
press and hold .
3-Touch Dialing (100 – 999)
In Standby mode, enter the first two digits of the desired
1.
Contact's speed dial number.
Press and hold the number key representing the third digit.
2.
Example: To speed dial the Contacts entry assigned to speed dial 235, press
, press , then press and hold
19
then
.
Voice Dialing
Your SCH-r330's voice recognition let's you speak phone
numbers and Contact names in a natural manner to call them.
Note: End Calls Before relaunching the VoiceSignal voice recognition
software — When you use voice recognition to make a call, you must
end that call before you can use other Voice Commands. See "Voice
SVC" on page 58 for more information.
Voice Dialing Tips
Wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking to someone
•
on the phone.
Dialing a Contact Name
In Standby mode, press and hold
1.
command" appears in the display and plays through the
earpiece.
Say "Call" followed by the Contact's first and last names.
2.
Voice Dial repeats the name and dials the number.
Note: If Voice Dial is unsure which name you said, it displays a choice list of
up to three names and prompts you with "Did you say?" followed by the
first name on the list. Say "Yes" to confirm the name, "No" to hear the
next name, or use the keypad to select the correct name from the list.
until "Say a