Jp7:Lcd Back Light Power Select; Jp8:M.2 Signal Select - JHCTech ALAD-K2120T(P) User Manual

User's Manual

2.3.5 JP7:LCD Back light Power Select

Figure 2.8
JP7 is used to select the power supplied with the LCD panel.
Important: Before powering-on the system, make sure that the power settings of JP7 match the
LCD panel's specification. Selecting the incorrect voltage will seriously damage the LCD panel.

2.3.6 JP8:M.2 Signal Select

Figure 2.11
JP8 is used to select the M.2 signal.
13