User's Manual
Wake on LAN
This field use to enable or disable the LAN signal to wake up the system.
After G3
This field is to specify what state to go when power is re-applied after a power failure (G3 state).
>Always On
The system working state.
>Always Off
Off, except for trickle current to devices such as the power button.
3.9.2 CPU Configuration
This section is used to configure the CPU.
Intel(R) SpeedStep(tm)
This field is used to enable or disable the Intel Enhanced SpeedStep Technology.
Turbo Mode
Enable or disable the turbo mode.
Figure 3.4 CPU Configuration
40