Samsung SCH-r211 Series User Manual page 38

Add Pauses to an Existing Contacts Entry
Find the desired entry in the Contacts list. (For more
1.
information, refer to "Finding a Contacts Entry" on
page 32.)
Press the Edit soft key. The Edit Contact screen appears
2.
in the display with the contact name highlighted.
Highlight a number stored in this contact entry.
3.
Use the Navigation key to place the cursor where you want
4.
to add a pause (usually at the right-hand end of the
number).
Press the Options soft key. The following menu options
5.
appear in the display:
• Set Speed Dial — lets you assign a Speed Dial number to this
Contacts entry.
• Set As Default — your phone automatically dials this number
when you find this Contacts entry and press the
• Wait — a hard pause (awaits input from you).
• 2-Sec Pause — a two-second pause.
Select the pause option of your choice to enter it into your
6.
number sequence.
35
When you're finished adding pauses, press
7.
your changes to the number in your Contacts.
Assigning Speed Dial Numbers
When you add or edit an entry to the Contacts list, you have the
option of assigning a Speed Dial number using the Options pop-
up menu or of returning to the Contacts menu and using the
Speed Dial option. You can also change a contact's Speed Dial
number.
Find the desired entry in the Contacts list. (For more
1.
information, refer to "Finding a Contacts Entry" on
page 32.)
Press the Edit soft key. The Edit Contact screen appears
2.
in the display with the contact name highlighted.
Use the navigation keys to highlight a number stored in
3.
this contact entry.
key.
Note: If a contact has more than one stored number (such as Home and
Office), you can select which of these numbers your phone will dial
when you Speed Dial that Contact.
Press the Options soft key.
4.
to save