Related Manuals for Samsung SCH-r211 Series
Summary of Contents for Samsung SCH-r211 Series
- Page 1 SCH-r211 Series P O R T A B L E T R I - B A N D M O B I L E P H O N E User Manual Please read this manual before operating your phone, and keep it for future reference.
-
Page 2: Intellectual Property
(and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers. - Page 3 Printed in Korea. T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and other patents pending. ® Openwave is a registered Trademark of Openwave, Inc. ® is a registered Trademark RSA Security, Inc.
-
Page 4: Table Of Contents
Rejecting a Call ........19... - Page 5 Tip Calculator ........58...
-
Page 6: Section 1: Getting Started
73. Notes and Tips Throughout this manual there is text that is set apart from the rest. These are intended to point out important information, quick methods for activating features, to define terms, and more. The definitions for these methods are as follows: Notes —... -
Page 7: Remove The Battery
Important!: You must fully charge the battery the first time you use your phone, otherwise you could damage the battery. Insert the top end of the battery first, matching the gold contacts on the top end of the battery to those inside the phone. -
Page 8: Charging The Battery
Plug the large end of the Travel Adapter into a standard 120 VAC or 220 VAC wall outlet. Note: For connection to an electrical supply not located in North America, you must use an adaptor of the proper configuration for the power outlet. -
Page 9: Activating Your Phone
• The phone begins searching for a network signal. • Once the phone finds a signal, the time, date, and day appear in the bottom of the display. • You’re now ready to place and receive calls. -
Page 10: Listen To Voicemail
Note: Once your Voicemail account has been set up, you can use the Voicemail folder (under the Message menu) to view details of voice messages in your Voicemail box. In standby mode, press and hold the own mobile number and press Follow the prompts in the new user tutorial to setup your mail box. -
Page 11: Section 2: Understanding Your Phone
Section 2: Understanding Your Phone This section outlines some key features of your phone. It also describes the screen format and the icons that will be displayed when the phone is in use. Features of Your Phone Domestic and international voice and text messaging service (available on participating networks). - Page 12 END Key — Ends a call. If you press and hold the END key, the power goes On or Off. When you receive an incoming call, press to send the call to voicemail.
-
Page 13: Command Keys
Command Keys Soft Keys Functions for the soft keys are defined by what appears above each in the display. There are two soft keys, the Left soft key and the Right soft key. Left Soft Key Some functions of the Left soft key ( In standby mode, press the Settings soft key ( •... -
Page 14: Understanding The Display Screen
In standby mode, press , then select Tools & Settings ➔ ➔ ➔ Settings Phone Info Icon Glossary. A list shows of the icons that can appear on the top line of the displays. Choice – Example: “Save Message?” Reconfirm... -
Page 15: Your Phone's Modes
Backlight menu. Note: During a phone call, the display backlight dims and turns off after 7 seconds to conserve battery power, regardless of the Backlight setting. (For more information, refer to “Backlight” on page 61) - Page 16 After you power the phone on. When you press after a call or from within a menu. • In standby mode, you will see the time, day, and date as well as all phone status icons. Place Calls in Standby Mode While in standby mode, enter a phone number, and press to place a call.
- Page 17 . “Exit Silent Mode” briefly appears in the display and your phone returns to standby mode. Vibrate Mode While in Vibrate Mode, your phone does not ring to indicate incoming calls or alarms, it vibrates instead. To enter Vibrate Mode: In standby mode, repeatedly press the Volume key ) down until “Vibrate”...
- Page 18 To Unlock the Keypad: In standby mode, press the Unlock soft key. Press * to unlock pops up in the display. Press . Keypad is unlocked! pops up in the display.
-
Page 19: Section 3: Call Functions
Press to place the call. Dialing Emergency Numbers You can dial any of the numbers 911, *911, or #911 to place an emergency call. If you dial 911, *911, or #911 and press the emergency number 911, automatically. -
Page 20: Making A Call - Contacts Dialing
Highlight the Contacts entry you want to dial. To dial the Default Number for this Contact: Press Tip: You can select any number stored in a Contacts entry as the Default Number. (For more information, refer to “Editing an Existing Contact Entry” on page 33.) To dial a number other than the Default Number: Making a Call —... -
Page 21: In-Use Menu
If you speed dial a contact that contains (two-second) P pause(s), • simply wait for the pauses to pass and the dialing to complete. If you speed dial a contact that contains (hard) W pause(s), wait for the • appropriate prompt(s) from the number you are calling (credit card number, bank account number, and so on) and enter the appropriate response(s). -
Page 22: Answering A Call
During an incoming call, press the Ignore soft key. The caller is immediately forwarded to your voice mail. Tip: You can mute the ringer to ignore an incoming call by pressing the Quiet soft key. Adjusting the Call Volume... -
Page 23: Outgoing Calls
Select the desired Calls log. A list of calls appears in the display. Note: In cases where there is a Contacts match for a Calls log entry, the name associated with the number appears in the display instead of the number. -
Page 24: Missed Calls
• Details — Contacts entries only — Shows details of the Contact who called you. • Erase this missed call record. (If this is a recent call, it will no longer appear in the Recent Calls list.) • Lock / Unlock this missed call record. - Page 25 • Details — Contacts entries only — Shows details of the Contact who called you. • Erase this call record. (If this is a recent call, it will no longer appear in the Recent Calls list.) • Lock / Unlock this call record.
-
Page 26: Roaming
• Received — View the amount of data (in kilobytes) that your phone has received since last being reset. • Total — View the amount of data (in kilobytes) that your phone has transmitted and received since last being reset. -
Page 27: Section 4: Menu Navigation
In standby mode, press the MENU key ( Menu appears in the display. Note: More than one menu may appear in your display. This setting can be modified in the Display > Menu Style menu. (For more information, refer to “Menu Style” on page 60) Use the Navigation key to browse through the menus. -
Page 28: Navigation Key Shortcuts
Highlight the searched for menu or menu item, then press Navigation Key Shortcuts In standby mode, press a Navigation key to launch the key’s corresponding application in the pattern shown here. Messages Go To Web Games&Apps Browser... -
Page 29: Section 5: Entering Text
Symbols pop-up window. The current text entry mode ( T9 Word , Abc , ABC , 123 , or Symbols ) is indicated in the lower part of a text entry screen. To change the... -
Page 30: Using T9 ® Mode
T9 Word is much faster than the traditional method of text entry (Abc) and requires only one key press per letter of the word that you’re spelling. While composing a text message, press the Left soft key. -
Page 31: Entering Numbers
While composing a text message, press the Left soft key, Select Symbols. The first of three symbol screens appears in the display. Use the Prev and Next soft keys to page through the other symbols, if desired. Press the key that corresponds with the symbol that you wish to enter. -
Page 32: Section 6: Understanding Your Contacts
Contacts sub-menus and options appear in the display: • Find — Find a phone number by entering a Contact name. • Add New Entry — Add a number or e-mail to your Contacts. • Speed Dial — Assign speed dial numbers to your Contacts. - Page 33 • Update Existing — Lets you add the number or e-mail address you just entered to an existing Contacts entry. Tip: You can also store a phone number from standby mode by entering the number, and pressing the Save soft key.
- Page 34 • Erase All — Deletes all numbers from the selected Calls log. • View Timer — Shows the call times for the Last Call, All Calls, Home Incoming, Home Outgoing, Roaming Calls, Last Reset, and Lifetime Calls timers for the selected Calls log.
-
Page 35: Finding A Contacts Entry
• Press the Options soft key. The following options appear in the display: – New Contact — Lets you add a new number to your Contacts list or to the selected Contact. – Erase — Lets you delete the highlighted Contact. -
Page 36: Editing An Existing Contact Entry
– Send Text Msg — Lets you send a text message to selected contact(s) in the current group. Press to enter that option’s sub-menu. Search by Number This option lets you find a Contacts list entry by one of its phone numbers. ➔ ➔ Contacts Group. - Page 37 Note: You can also add numbers (such as a Pager number or a Fax number) to the entry, assign it to a Group, and add other information. When you’re finished editing the entry, press changes are saved and a confirmation message appears in the display.
- Page 38 Press the Options soft key. The following menu options appear in the display: • Set Speed Dial — lets you assign a Speed Dial number to this Contacts entry. • Set As Default — your phone automatically dials this number when you find this Contacts entry and press the •...
- Page 39 The following menu options appear in the display: • Set Speed Dial — Lets you assign a Speed Dial number to this Contacts entry. • Set as default — Your phone automatically dials this number when you Find this Contacts entry and press •...
-
Page 40: Speed Dial Numbers
• To insert the @ symbol, do the following: – Press the abc soft key. A pop-up menu appears in the display with Abc highlighted. – Select Symbols. – Select the @ symbol. – Enter the remainder of the e-mail address using the keypad. (For more information, refer to “Entering Text”... -
Page 41: Deleting A Contacts Entry
Options soft key. The following options appear in the display: • Send Text Msg — Lets you send a text message to all contacts in the selected Group. • Rename — Lets you change the name of the selected Group. -
Page 42: Section 7: Messaging
Left and Right navigation keys to select a phone Number or E-mail address for the highlighted Contact. Press To add the selected contacts to the Send To list, press the Done soft key. The Create Txt Msg screen appears in the display. -
Page 43: Message Send Options
– Repeatedly press and hold the method is indicated by the left soft key label. – Press the Left soft key, use the navigation keys to select the desired text input method, and press • Press the Left soft key to select one of the following text entry methods: –... -
Page 44: Receiving New Messages
Enter your password, then follow the recorded prompts, to listen to your voice message, change administrative options, and so on. Tip: You can also access your Voicemail by using the entries in the Voicemail folder. For more information, refer to “Voicemail” on page 44. until you’re... -
Page 45: Message Folders
– Forward — Lets you forward the message to other e-mail addresses or mobile phone numbers. – Reply With Copy — Lets you reply to a message and include a copy of the original message. – Save Quick Text — Saves the message text as a Preset Message entry. - Page 46 – Forward — Send the message to another addressee. – Resend — Re-send the message. – Lock / Unlock — Block a message from being erased or free a message to be erased. – Add To Contacts — Lets you add the addressee numbers or e-mail addresses to your Contacts list.
-
Page 47: Drafts Folder
– Add To Contacts — Lets you add the addressee numbers or e-mail addresses to your Contacts list. – Save Preset Msg — Save the message text in the Preset Msg folder. – Erase Drafts — Erase all unlocked messages in the Drafts folder. -
Page 48: Erasing Messages
• Auto Erase — Automatically erase the oldest read message after memory is full. • Auto View — Automatically displays the message. • Entry Mode — Lets you set the default text entry mode [T9 Word, Abc/ABC (alphabetical), or 123 (numerical)] for composing message text. - Page 49 • CB# — Lets you disable, enable, and update the callback number that can be inserted in outgoing messages. • VM# — Lets you update your Voicemail access number. • Signature — Lets you disable, enable, and update the text signature that can be inserted in outgoing messages.
-
Page 50: Section 8: Browser
Section 8: Browser This section outlines how to launch Browser, how to navigate to other pages on the web, and how the keys on the keypad are used with the web application. Additionally, links to other sites are briefly discussed. -
Page 51: Using Links
) soft keys on the Asterisk/Shift Key — Press before entering text to enable uppercase characters. Last Key — Press to enter a zero (0), or to move to the last item in a menu. Pound/Space Key — Press to insert a space when entering text. -
Page 52: Section 9: Games & Apps
• Press . The Games & Apps menu appears in the display. You can use the items in this menu to browse or search for, purchase, and download applications. • Use the navigation keys to select an application on your phone that... -
Page 53: Section 10: Tools/Utilities
• Memo Pad — Lets you store and review useful information. • Alarm Clock — Lets you set an alarm to go off once, or daily, at a specified time. • World Time — Lets you view the current time of day or night in another part of the world. -
Page 54: Memo Pad
(For more information, refer to “Entering Text” on page 26.) Note: Enter the dates and times for the event using 2 digits for day, month, hour, and minute entries. Use 4 digits for year entries. Use the Left/Right navigation keys to change between AM and PM. -
Page 55: Alarm Clock
– To keep the memo, press the No soft key. Alarm Clock Your phone has an alarm clock that can be set to go off once, or daily at a specified time. Once set, the alarm clock is easy to change or turn off completely. - Page 56 Use the navigation keys to highlight Dismiss, then press to silence the alarm. • If the alarm was set as a Daily alarm, the alarm icon remains in the top of the display. • If the alarm was set as a Mon.-Fri. alarm, the alarm icon remains in the top of the display.
-
Page 57: World Time
Use the navigation keys to highlight the desired option, then press World Time World Time lets you view the time of day or night in another part of the world. World Time displays time in any of 45 different cities and/or time zones around the world. -
Page 58: Calculator
• To return to the Tools menu without setting a new home time zone, press Calculator You can perform calculations, including addition, subtraction, multiplication, and division using your phone. From the Tools/Utilities menu, select Calculator. The Calculator appears in the display. -
Page 59: Converter
From the Tools/Utilities menu, select Converter and the conversion feature you wish to use. Use the Navigation key to select the units to be converted From and To. Enter the quantity you want converted in the From field. - Page 60 Press SAVE ( Currency — Erasing Exchange Rates You cannot erase the preloaded currencies from the Exchange Rate list. You can erase a currency that you have added to the list by doing the following: From the Tools/Utilities menu, select Converter Currency.
-
Page 61: Tip Calculator
From the Tools/Utilities menu, select Tip Calculator. The Tip Calculator screen appears in the display with the Bill field highlighted. Use the keypad to enter the total amount of the bill. (For more information, refer to “Entering Numbers” on page 28.) If needed, press the Down navigation key to highlight the Tip field. -
Page 62: Section 11: Changing Your Settings
Settings. standby mode animation, customize the backlight settings, and more. • 911 Only — GPS location setting is on only when you dial 911. Use the navigation keys to highlight the option you want. Press to select the desired Location setting. You’re returned to the Settings menu. -
Page 63: Menu Style
• My Images — Choose a downloaded image to appear in the display when the phone is in standby mode. • Preset Images — Choose a preset image to appear in the display when the phone is in standby mode. - Page 64 “Entering Text” on page 26.) Press to save the new banner. You can set the backlight for your display or keypad to remain on or off or to remain on for a specified period of time. ➔...
-
Page 65: Sound Settings
At the Settings menu, select Sound Settings The following options appear in the display: • Voice Calls — Lets you set the volume and/or vibration for the incoming calls ringer. • Messages — Lets you set the volume and/or vibration for the incoming messages ringer. -
Page 66: Call Settings
• Roaming — Sounds an alert when you leave your home service area. • Call Connect — When you make a call, an alert sounds when the call is answered. • Power On/Off — Plays a melody when you turn the phone on or off. -
Page 67: Auto Answer
• Send Key — Press to answer an incoming call. Tip: You can set your phone to answer calls automatically, without any input from you. (For more information, refer to “Auto Answer” on page 64.) Highlight the method you wish to use for answering calls,... -
Page 68: Phone Settings
At the Settings menu, select Phone Settings to save your Mode.The following options appear in the display: • On — Disables the radio transmitter and receiver in your phone. • Off — Enables the radio transmitter and receiver in your phone. Select the desired option. - Page 69 At the Settings menu, select Phone Settings You’re prompted to enter the lock code. Note: The default lock code is the last four digits of your telephone number. ➔ Enter the lock code, then select Lock Phone.
- Page 70 At the Settings menu, select Phone Settings You’re prompted to enter the lock code. Note: The default lock code is the last four digits of your telephone number. Enter the lock code, then select Change Lock. You’re prompted to enter the New Lock Code.
- Page 71 At the Settings menu, select Phone Settings You’re prompted to enter the lock code. Note: The default lock code is the last four digits of your telephone number. Enter the lock code, then select Reset Phone. You are prompted to confirm that you wish to reset your phone’s Settings to default values (except for your Contacts list and Voice Dial).
-
Page 72: System Select
You’re prompted to enter the lock code. Note: The default lock code is the last four digits of your telephone number. Enter the lock code, then select Restriction. The following options appear in the display: • Outgoing — Blocks/allows all outgoing calls. -
Page 73: Quick Search
For example, to search for “Inbox” you would enter: (for pm).] ➔ Quick Tip: If the menu item you are searching for does not appear in the Menu List screen, try expanding your search by pressing digit of your entry. Searching for a Contact Press the Down navigation key. -
Page 74: Memory Info
Press Icon Glossary This option causes the ICON GLOSSARY list to appear in the display and show the icons that can appear in the display and the names of the icons. At the Settings menu, select Phone Info Glossary. A list of the icons that can appear on the top line of the display shows in the display. - Page 75 You can view both the software and hardware version of your phone using this feature. This feature is helpful if you need to contact Customer Service. At the Settings menu, select Phone Info Your phone’s hardware and software version information appears in the display.
-
Page 76: Section 12: Health And Safety Information
This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. -
Page 77: Samsung Mobile Products And Recycling
Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for typical or maximum SAR for a particular phone. -
Page 78: Consumer Information On Wireless Phones
However, the agency has authority to take action if wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the... - Page 79 Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following: Support needed research into possible biological effects of RF of the •...
- Page 80 RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don't know with certainty what the results of such studies mean for human health.
- Page 81 What steps can I take to reduce my exposure to radio frequency energy from my wireless phone? If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But if you are...
- Page 82 RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S.
-
Page 83: Road Safety
This standard was approved by the IEEE in 2000. FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. - Page 84 Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.
-
Page 85: Responsible Listening
As a result, there is no single volume setting that is appropriate for everyone or for every combination of sound, settings and equipment. - Page 86 Temporary hearing loss might cause unsafe volumes to sound normal. Do not listen at any volume that causes you discomfort. If you • experience ringing in your ears, hear muffled speech or experience any temporary hearing difficulty after listening to your portable audio device, discontinue use and consult your doctor.
-
Page 87: Operating Environment
Operating Environment Remember to follow any special regulations in force in any area and always switch your phone off whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its user's guide for detailed safety instructions. -
Page 88: Fcc Hearing-Aid Compatibility (Hac) Regulations For Wireless Devices
Should use the ear opposite the implantable medical device to • minimize the potential for interference; Should turn the phone OFF immediately if there is any reason to • suspect that interference is taking place; Should read and follow the directions from the manufacturer of your •... -
Page 89: Potentially Explosive Environments
A sum of 6 is considered for best use. In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level rating, the sum of the two values equal M5. -
Page 90: Emergency Calls
Restricting Children's access to your Phone Your phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and others, damage the phone or make calls that increase your phone bill. -
Page 91: Fcc Notice And Cautions
• inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result. -
Page 92: Product Performance
Understanding the Power Save Feature If your phone is unable to find a signal after searching, a Power Save feature is automatically activated. If your phone is active, it periodically rechecks service availability or you can check it yourself by pressing any key. -
Page 93: Battery Standby And Talk Time
Extreme temperatures will affect the charging capacity of your battery: • it may require cooling or warming first. Do not leave the battery in hot or cold places, such as in a car in • summer or winter conditions, as you will reduce the capacity and... -
Page 94: Care And Maintenance
0 °C (32 °F). • Do not place the phone in areas that may get very hot, such as on or near a cooking surface, cooking appliance, iron, or radiator. Do not get your phone or battery wet. Even though they will dry and •... - Page 95 Do not paint the phone. Paint can clog the device's moving parts and • prevent proper operation. Do not put the phone in or on heating devices, such as a microwave • oven, a stove or a radiator. The phone may explode when overheated.
-
Page 96: Section 13: Warranty Information
United States or Canada. This Limited Warranty covers batteries only if battery capacity falls below 80% of rated capacity or the battery leaks, and this Limited Warranty does not cover any battery if (i) the battery has been charged by a battery charger not specified or approved by... - Page 97 Product or replace Product with a rebuilt, reconditioned or new Product. Repaired/replaced leather cases, pouches and holsters will be warranted for a period of ninety (90) days. All other repaired/replaced Product will be warranted for a period equal to the remainder of the original Limited Warranty on the original Product or for 90 days, whichever is longer.
- Page 98 OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS...
-
Page 99: End User License Agreement For Software
Software on the local hard disk(s) or other permanent storage media of one computer and use the Software on a single computer or a mobile device at a time, and you may not make the Software available over a network where it could be used by multiple computers at the same time. - Page 100 Software. 9. DISCLAIMER OF WARRANTIES. You expressly acknowledge and agree that use of the Software is at your sole risk and that the entire risk as to satisfactory quality, performance, accuracy and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS"...
- Page 101 Software up to the amount actually paid by you for the Software or US$5.00. The foregoing limitations, exclusions and disclaimers (including...
- Page 102 Samsung Telecommunications America, LLC: 1301 East Lookout Drive Richardson, Texas 75082 Phone: 1-800-SAMSUNG (726-7864) Important!: If you are using a handset other than a standard numeric keypad, dial the numbers listed in brackets. Phone: 1-888-987-HELP (4357) © 2009 Samsung Telecommunications America. All rights...
- Page 103 No reproduction in whole or in part allowed without prior written approval. Specifications and availability subject to change without notice. Warranty Information...
-
Page 104: Index
Using Links Call Settings Auto Answer Auto Retry Call Answer TTY Mode Voice Privacy Changing Your Settings Contacts List Open Creating and Sending New Messages Text Message Display Settings Backlight Banner Clock Format Contrast Dialing Font Size Menu Style Wallpaper Exit Browser Games &... - Page 105 Phone Safety Phone Settings Airplane Mode Language Quick Search Security Settings Set Time System Select Receiving New Messages While in a Call SAR values Security Settings Change Lock Emergency # Erase All Entries Lock Phone Resetting Your Phone Restriction Settings...
- Page 106 Using Abc Mode Text message Time, set Tools/Utilities Tools/Utilities Menu T-Ratings TTY Mode UL Certification Understanding Your Contacts Adding a New Contact Entry Deleting a Contact Entry Editing an Existing Contact Entry Finding a Contact Entry Memory Pauses Version Voicemail Checking...