Table of Contents
Advertisement
38
External Trigger
Trigger threshold:
Hysteresis:
Input load:
Maximum input voltage:
Minimum trigger time:
Microprocessor and Data Communication
Processor:
Memory:
Data communication:
Expansion Ports
2
I
C expansion port:
Physical Configuration
Dimensions (w × h × d):
Weight:
Operating voltage:
Nominal power needs:
Maximum power needs:
Operating temperature range:
ADInstruments reserves the right to alter these specifications at any time.
+2.9 V ±0.25 V or contact closure
(software-selectable)
1.1 V (turns off at +1.8 V ±0.25 V)
2.2 mA at 5 V, 5.5 mA at 10 V
±12 V
5 µs
PPC403 GCX (60 MHz internal)
4 MB DRAM
USB (up to 800 kilobytes/s, possibly greater
dependent on setup)
Power and control bus for front-end units.
Supports up to 16 front-ends, but limited to
the PowerLab's free connectors. Interface
communications rate of up to 10,000 bits/s.
200 mm × 65 mm × 250 mm
(7.9" × 2.6" × 9.8"); excludes connectors
2.4 kg (5 lb 3 oz)
90–260 V AC 50/60 Hz
6 VA (25 mA @ 240 V or 52 mA @ 115 V); no
front-ends or pods attached
18 VA (full complement of front-ends and
pods)
0 to 35 °C, 0 to 90% humidity (non-
condensing)
PowerLab Owner's Guide
Advertisement
Table of Contents
