Samsung SCH-a990 Series User Manual page 123

Edit Lock Code
The default lock code is the last four digits of your
phone number. Edit Code allows you to change this code
to a lock code of your preference.
1. In standby mode, press
navigation key to highlight
Press
are listed in the display.
2. Press
code. The default lock code is the last four digits of your
telephone number.
3. Press
and Location. Use the navigation keys to highlight your
choice and press
4. At the "ENTER NEW LOCK CODE" or "ENTER NEW
LOCATION LOCK CODE" prompt, enter the new lock
code.
5. At the "CONFIRM LOCK CODE" prompt, enter the new
lock code.
6. "DEVICE CODE SET" or "LOCATION LOCK CODE SET"
message appears in the display confirming that your lock
code has been changed.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Phone Settings. The Phone Settings menus
Security. You're prompted to enter the lock
Edit Code. Two options are available Device
.
Section 8: Changing Your Settings
Phone Settings
MENU, use the right
SETTINGS & TOOLS.
123