Advertisement
Available languages
Available languages
Notice
Operation Instruction
•
Remove all package material (including anti-vibration object of the lamp) and check the
appliance, supply cord and the plug for signs of damage.
•
Pay attention to the mounting place and all mounting material (dowels, screws). Ensure
they are suitable and stable enough for mounting and lastingly holding of the appliance.
•
Before mounting, the minimum safe mounting distances and tilt angles shown in the figures
must be strictly followed.
•
The distance between the bottom edge of the appliance and the floor must be at least 1.8
M. See figure 2.
•
There must be a distance of at least 0.25 M between the appliance and the ceilings, roofs or
other covers. See figure 2.
•
There must be a distance of at least 0.5 Mat each side between the appliance and walls or
the like. See figure 2.
•
Recommended degree to mounting surface is 45°.See figure 3.
•
Pay attention that, the installation of the appliance must not add excessive wind load.
•
Fix the mounting bracket to the ceiling first. Ensure that the place to be installed is secure
and firm. Then fix the appliance to the bracket.
•
Adjust the desired angle of radiation and fest screw all screws. Check regularly the screw´s
connection. Mechanical bearing pressure and oscillation due to wind or rain could lead to
loosen.
•
Plug in the power source and operate the remote control. Then observe, whether during the
first 10-15 minutes the appliance works trouble-free.
•
If you do not use, please remote battery socket.
Use 2 pieces AAA size 1.5 V batteries in the remote control.
Remove the battery when not use for long time, thus the
lifespan of the battery when not use for long time, thus the
lifespan of remote control can be extended.
Choose the same specification battery when replacing the
battery inside, otherwise it may cause remote control not work,
thereby affect the normal use of the heater.
Please contract service agent for further help if you need the
function.
The remote-control function may be out of work if there is a
barrier between the remote control and heater.
Replacing the batteries duly so as not to affect the normal use
of heater and remote control.
Advertisement
