Advertisement
Available languages
Available languages
•
Always plug heaters directly into a MAINS socket outlet with a protective earthing connection.
Never use with an extension cord or relocatable power tap (outlet/power strip)
•
Check if the voltage indicated on the nameplate of the appliance corresponds to the local mains
voltage before you connect the appliance.
•
The appliance is not located immediately below a wall socket-outlet.
•
The casting and the front cover of the appliance become extremely hot during operation. Pay
attention that, no combustible material due to wind or other environmental influences covers or
obstructs the appliance, such as curtains, marquees, flags, plastic foil etc.
•
Do not touch the appliance. Caution! Risk of scald injury!
•
In case of improper use, there is a risk of electrical shock and/or fire hazard. Operation of the
appliance must be discontinued and remove the mains plug immediately. Do not try to repair
the appliance by yourself. Please contact with the service agent or a suitably qualified electrician
for maintenance.
•
Remove the plug from the power outlet and wait until the appliance is sufficiently cooled off
before cleaning.
•
The appliance must only be mounted by an authorized specialist, paying attention to the
relevant regulations of the power supply companies and the regional construction regulations.
Save these Instructions
Specifications
Specifications
Voltage (V)
Power (W)
IP protection
Infrared receiving Angle
Bluetooth receiver distance
The speaker power
LDHR062-150KB-S
LADHR062-200KB-S
220-240V
1500W for LDHR062-150KB-S
2000W for LDHR062-200KB-S
IP65
60° ± 5°
≤20M
3Wx2
Advertisement
