Subscribe to Our Youtube Channel
Related Manuals for FONESTAR ZS-1500
Summary of Contents for FONESTAR ZS-1500
- Page 1 Digital Public Address and Voice Alarm System Operation Manual M_2000060928_EN_1.0...
- Page 3 The contents of this document are subject to revision without notice due to continued progress in methodology, design, and manufacturing. Fonestar shall have no liability for any error or damage of any kind resulting from the use of this document.
-
Page 5: Safety Guidelines
Safety Guidelines Danger This sign reminds users that the product contains equipment that has dangerous levels of high voltage. Caution This sign reminds users of important instructions attached to the product. To prevent an electric shock, do not use an extension cord when Safety Guideline connecting the appliance to a plug outlet. -
Page 6: Safe Use Precautions
The appliance is not waterproof. Do not expose the appliance to rain or moisture to avoid damage. Place the appliance on a level, stabilized surface or rack. Do not place other items on top of the appliance. Safe Use Precautions ... -
Page 7: Table Of Contents
Automatic Emergency Broadcasting ..................... 5 Public Paging............................5 Emergency Paging..........................6 ZS-1500/ZS-2250/ZS-4125 Operations Guide..................7 Powering the ZS-1500/ZS-2250/ZS-4125 On/Off ..................7 Precautions ..............................7 ZS-200M Operations Guide ........................8 Initializing the ZS-200M ..........................8 Public Address and Paging ......................... 9 Emergency Broadcasting and paging ...................... -
Page 9: Preface
FONESTAR SISTEMAS, S.A. Co., Ltd. shall prevail. The FONESTAR SISTEMAS, S.A. Co., Ltd is not liable for any consequences caused by user mistakes when using the product or user misunderstandings of the manual content. -
Page 10: Zs-2000M Operations Guide
1 ZS-2000M Operations Guide The ZS-2000Mis a broadcasting control device that expands broadcasting zones and supports multiple sound sources. The ZS-2000M integrates with functions such as the sound source file storage system, network audio broadcasting system, the loudspeaker zone control system, and the system for monitoring and diagnosing faults. -
Page 11: Zone Selection
Zone Selection A zone is selected by pressing the button that represents the zone. Press the selected zone button again to deselect the zone. Press the ALL button on the ZS-2000M front panel to select all zones, and press this button again to deselect them. -
Page 12: Broadcasting Operation
Table 1 Power Amplifier Audio Channel Sound Volume Controls Channel No. Increase Volume Decrease Volume ”Fn”button + ”Fn” button + ”Fn”button + ”Fn”button + ”Fn”button + ”Fn”button + ”Fn”button + ”Fn”button + Broadcasting Operation This section describes how to use the ZS-2000M for public broadcasting, including general- purpose broadcasting and fire emergency broadcasting. -
Page 13: Automatic Emergency Broadcasting
Press the Zone button to select a zone or zones. Multiple zones can be selected. To select all zones, press the ALL button. Indicator lights for selected zones flash green. Select the sound sources. Previewing the sound source is available if the sound source indicator light flashes green. The built-in loudspeaker broadcasts according to the play policy for audition. -
Page 14: Emergency Paging
Emergency Paging To make a manual emergency voice broadcast through the PTT microphone, the equipment has to state in the manual emergency broadcast mode, follow the steps below: Press the Emergency button to enter emergency broadcast mode. Select the zone or zones for the paging. Press the Zone button to select a zone or zones. -
Page 15: Zs-1500/Zs-2250/Zs-4125 Operations Guide
1500/ZS-2250/ZS-4125 turns green, the respective power supply is working normally. When the power supply indicator light turns orange, the respective power supply has experienced a fault. Check whether the power supply is connected correctly and that the ZS-1500/ZS-2250/ZS- 4125 power switch is turned on. -
Page 16: Zs-200M Operations Guide
3 ZS-200M Operations Guide The ZS-200M has features including an interactive touch panel, the ability to configure preset broadcasting programs, zone paging, broadcast monitoring, and a full duplex intercom function. The ZS-200M is also capable of paging and controlling broadcasts on zones throughout the Digital Public Address and Voice Alarm system. -
Page 17: Public Address And Paging
Figure 3 Public Address And Paging Mode Interface The following information describes the icons shown in Figure 3: Touch the icon to initiate public address and paging. Touch the icon to initiate volume setting. Touch the icon to monitor broadcasts. ... -
Page 18: Emergency Broadcasting And Paging
Touch Paging or press the TALK button on front panel of the ZS-200M to start paging to the selected zone. The users can set 2 operation modes of the TALK button: Press and Toggle. The differences between them please refer to the following Note. Note: Press trigger operation: Press and hold the TALK button to begin paging, and then release the button to release the selected zones and stop paging. -
Page 19: Monitor Function
The icon shows microphone volume, touch the button button to change the microphone volume. The icon shows the monitor speaker volume, touch the button button to change the monitor speaker volume. Monitor Function The following steps describe how to use the ZS-200M to monitor a zone: Touch the icon. -
Page 20: Receiving An Intercom Request
Wait until the opposite party has received the full duplex intercom request. When the opposite party receives the intercom request, the two parties can begin the conversation. When the opposite party cannot receive the full duplex intercom request, the screen will go back. - Page 21 Issues Possible Causes Corrective Action duplex software. intercom The opposite party must be online to initiate the function Opposite party is not online full duplex intercom function. Incorrect paging operation Follow the paging directions in section 3, ZS- performed 200M Operations Guide sound when The volume of the ZS-200M is speaking...
-
Page 22: Zs-4328Io Operations Guide
4 ZS-4328IO Operations Guide The ZS-4328IO is an external interface expansion control equipment in Digital Public Address and Voice Alarm System to meet the common interface requirements of the broadcasting system. It includes 4 auxiliary inputs that can connect to external audio sources, and 1 built-in audio source. All the audio sources broadcasted through an Ethernet network.
Need help?
Do you have a question about the ZS-1500 and is the answer not in the manual?
Questions and answers