Samsung SCH-A670 Series User Manual page 115

2. Use the navigation keys to highlight the desired setting,
then press
Data
Use the Data sub menu to set the Auto Detect feature for
when you receive data and to set the Data Baud Rate.
1. In standby mode, press the left soft key (
press
following table appear in the display.
Sub menu
Auto Detect
Baud Rate
2. Use the navigation key to highlight the Data sub menu of
your choice, then press
3. Use the navigation key to highlight
Rate, then press
4. Select the Auto Detect or Baud Rate settings as desired.
.
, , for
Function
Set data auto detect capabilities. Options are
data off, data for next call, and data until powered
off.
Set the baud rate for data connections. Options
are Auto, 19200, 38400, 57600, 115200,
and 230400.
.
Data The sub menus listed in the
.
.
Auto Detect
) Menu, then
or Baud
107
Setup