SEAT
Removing the seat
To remove pillion seat (1), insert the ignition
key in the seat lock (2) and turn it clockwise.
Pull the seat backwards and lift.
To remove the rider seat (3), unscrew the two
socket screws (4), pull the seat backwards
and lift.
Fitting the seat
To install the rider seat, insert the two front
extensions at the sides under the fuel tank
and the central protrusion in the location under
the frame cross member. Now fit the two
socket screws and tighten them fully.
To install the pillion seat insert the two
protrusions in the locations in the rear
subframe and press the rear of the seat
downwards.
After installing, check that the seat is securely
locked in
position.
(3)
(1) Pillion seat
(2) Seat lock
(4)
(1)
(2)
(3) Rider seat
(4) Socket screws
49