Table of Contents
Advertisement
SCH-811(E-US)
1/20/99 10:35 AM
Activation
Voice Dialing is always active once you have trained
the phone to accept Voice Dialing entries. To place
calls using Voice Dialing, simply press and hold
and then say the name into the phone after you hear
the prompt.
You can also initiate a Voice Dialing call just by
opening the folder, when you select this option
through the Main Menu.
To change Voice Dialing setup options:
1. Press
to display the Main Menu.
MENU
2. Press
6
for Voice Dial.
MNO
3. Press
4
for Set Active.
GHI
4. Press the scroll keys to toggle between options:
• [ ] only: Enables Voice Dialing by pressing and
holding
• [ ] / Folder: Enables Voice Dialing by pressing
and holding
the folder.
5.When the desired option displays, press
save the setting.
Page 46
,
.
, or by opening
to
OK /
46
Using Voice Dialing
Placing a Call
To place a call using Voice Dialing:
1.To place the call, press and hold
the folder, depending on the setting.
2.At the voice prompt, say the name into the phone.
• If the phone recognizes the name, the phone
attempts a connection.
• If the phone does not recognize the name, the
screen prompts for the name again.
• If the phone is unable to recognize the name
after two attempts, the message "Cannot
Recognize Name. Please check name." displays.
Try the call again later, or check the recorded
name.
Reviewing Voice Dialing Entries
To review Voice Dialing entries:
1. Press
to display the Main Menu.
MENU
6
2. Press
for Voice Dial.
MNO
3. Press
2
for Review. A list of entries displays.
ABC
4. Press the digit key to select the desired entry, or
press the scroll keys to scan entries. The recorded
names play audibly as you scroll through the list.
5. Press
to return to Standby mode.
END/
47
, or open
Advertisement
Table of Contents
