Table of Contents
Advertisement
MetroA670.book Page 37 Friday, November 12, 2004 12:03 PM
Add pauses
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering the numbers, you can store the numbers to Contacts
along with special characters called pauses.
•
P pause: Stops the calling sequence until the phone
receives further input.
•
T pause: Stops the calling sequence for two seconds,
then sends the remaining digits.
You can enter multiple two-second pauses to extend the
length of a pause. For example, two consecutive two-second
pauses cause a total pause time of four seconds. Keep in
mind pauses count as digits towards the 32-digit maximum.
Store pauses in a Contacts entry
1. In standby mode, enter the number you want to store
(such as your bank's teleservice number).
2. Press the left soft key (
menu options appear in the display.
P pause
T pause
P pause
is a hard pause (awaits input from you).
T pause
is a 2-second pause that resumes after 2 seconds.
3. Use the navigation key to highlight the pause option of
your choice
4. Press
to enter the highlighted pause into the
number sequence.
) Option. The following pause
Contacts
37
Advertisement
Table of Contents
