Function: Allows you to use characters displayed at
the top of the QWERTY keys. Examples: <, >,*, $, @,
#, ?
Press
•
special characters on the QWERTY keyboard.
When Function is ON, the
on the top annunciator line of the display.
Press
•
mode. When Function is LOCKED, the
will appear on the top annunciator line of the
display.
Press
•
Shift: Toggles the casing for alphabet characters
between initial case, uppercase and lowercase.
Press
•
Press
•
Press
•
Abc.
Backspace: Deletes the previous character.
67
once to toggle from letters to orange
icon will appear
twice to lock the keyboard in Fn
once more to return to Abc mode.
once to toggle from Abc to ABC.
twice to toggle from ABC to abc.
three times to toggle from abc to
The keyboard provides dual-use keys labeled with alphabetic
characters and numbers on the lower half and symbols on the
upper half. Press the key combination corresponding to the
character you want to enter.
Entering Characters
icon
Characters can be entered using either Uppercase or Lowercase.
Slide out the QWERTY keyboard and enter your text. By
1.
default the Rogue™ is in Initial case and characters then
revert back to lowercase.
Press the desired text key.
2.
• For example, to enter the word "Sam", type the keyboard sequence
below.
• If you make a mistake and enter the wrong character, press
erase a single character. Press and hold
word.
Enter: Moves the insertion point to the next line in a
message.
to
to erase an entire