Voice Commands - Samsung Rogue SCH-U960 User Manual

Voice Commands

Voice Commands is advanced
speech recognition software that
can be used to activate a wide
variety of functions on your
Rogue ™ . Voice Commands
software automatically voice
activates all contacts for voice
dialing and searching, no pre-
recording or training needed.
Speak phone numbers naturally to
dial, and use voice commands to
navigate phone menus.
From the Home screen, press
the Voice Commands button (on the right side of
the phone).
The following is a list of functions you can perform using Voice
Commands speech recognition on your phone.
Call <Name or #>: Dial by saying a Name in your Contacts List, a
•
Name and a Location (home, work, mobile) or the phone number.
Send <MSG Type>: Send a text, picture, or video message to a
•
number or to someone in your Contacts List.
Go To <Menu>: Open any application installed on your device.
•
45
Check <Item>: Provides details of your phone status, Voicemail,
•
Messages, Missed Calls, Time, Signal Strength, Battery Level, Volume
Level, Balance, Minutes, Payment, and My Number.
Contacts <Name>: Open the contact record for a matched name in
•
your Contacts List.
Redial: Allows you to call the last number dialed.
•
Play <Playlist>: Opens the My Music menu, or plays songs in a
•
playlist or all songs if requested.
My Verizon: Provides information about your Verizon Wireless
•
account.
• Help: Provides a helpful tutorial on how to use Voice Commands.
Call <Name or #>
Digit Dial allows you to dial any phone number by simply
speaking the digits into the Rogue
and Digit Dial is programmed to understand natural speech.
Note: You may need to train the speech recognition to understand Contact
names that you speak.
From the Home screen, press the
1.
Commands button (on the right side of the phone).
. No training is necessary,
™
Voice