CONFIGURATION GUIDE
NIC Teaming feature – NIC Teaming and bonding features
NIC Teaming and bonding features are available with this server to provide network redundancy and load
balancing for higher network reliability and optimized network loads.
Windows Server and Linux environement, network redundancy is supported with Teaming/Bonding functions
supported by OS.
See the table below for supported network interfaces, operation mode and number of teams.
◆Windows Teaming
Network Interface
NE3304-151M/-152M
(1000BASE-T)
NE3304-158
(10GBASE-SR)
NE3304-157
(10GBASE-T)
NOTE:
Teaming with one port shared among multiple teams: Not supported
Network interface for teaming should be all the same.
Teaming of the port using iSCSI: Not supported
◆Linux Bonding
Network Interface
NE3304-151M/-152M
(1000BASE-T)
NE3304-158/-159
(10GBASE-SR)
NE3304-157/-157L
(10GBASE-T)
NOTE:
Network interface for teaming should be all the same.
Contatc to our sales representative for other than Active-backup
Can mix 1000BASE bonding, 10GBASE-SR bonding and 10GBASE-T bonding within one system
NEC Corporation
–
NEC Express5800/A2040e, A1040e
Operation Mode
・Generic or static
Teaming
・Dynamic teaming
・Switch-independent
Operation Mode
Recommend:
active-backup
(fault-tolerance)
Rev.1.0 – June 2018
Configuration
4 ports in one card
Up to 4 ports per one
4 ports among
Up to 16 teams per one
multiple cards
2 ports in one card
Up to 2 ports per one
2 ports among
Up to 8 teams per one
multiple cards
2 ports in one card
Up to 2 ports per one
2 ports among
Up to 8 teams per one
multiple cards
Configuration
2 ports in one card
Up to 2 ports per one
2 ports among
Up to 16 teams
multiple cards
2 ports in one card
Up to 2 ports per one
2 ports among
Up to 8 teams
multiple cards
2 ports in one card
Up to 2 ports per one
2 ports among
Up to 8 teams
multiple cards
Number of Teams
team
system
team
system
team
system
Number of Bonding
bonding
bonding
bonding
26