Place Of Installation - Vision TECHCONNECT TC2 VGATP Owner's Manual

PLACE OF I NSTALLATI ON
Avoid installing this product under the following conditions:
• Moist or humid places
• Places exposed to direct sunlight or close to heating equipment
• Extremely cold locations
• Places subject to excessive vibration or dust
• Poorly ventilated places
Do not expose this product to dripping or splashing. DO NOT PLACE OBJECTS FI LLED WI TH
LI QUI DS ON OR NEAR THI S PRODUCT!
WARNI NG SI GNS
I f you detect an abnormal smell or smoke, turn this product off immediately and unplug the
power cord. Contact your reseller or Vision.
PACKAGI NG
Save all packing material. I t is essential for shipping in the event the unit ever needs repair.
NOTE: I f original packaging is not used to return the unit to the service centre, damage in
transit will not be covered by warranty.
OVERVI EW
This product extends VGA by converting the signal and routing it through CAT5e (ethernet)
cable up to 60m long. I f CAT6 cable is used 80m cable be achieved.
3
TC2_VGATP_manual_en