Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Kvik Manuals
  4. Indoor Furnishing
  5. Tinta
  6. Assembly manuallines

Kvik TINTA Assembly Manuallines

Hide thumbs Also See for TINTA:

Advertisement

Quick Links

Download this manual See also: Manual
TINTA
Assembly
Guideline
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the TINTA and is the answer not in the manual?

Questions and answers

Related Manuals for Kvik TINTA

Summary of Contents for Kvik TINTA

  • Page 1 TINTA Assembly Guideline...
  • Page 2 Type in the unit number as quoted on the component list. This booklet is a guide specifically aimed at the assembly of the Kvik Tinta B4001. 80 cm - for use with BP00481 model.
  • Page 3 (G) Screw (H) Screw (I) Washer Ø4,0x60 mm Ø4,0x16 mm For Kvik’s Tinta model the end Ø8 mm head Ø8 mm head panels must be attached before the cabinets kan be screwed together. It is important that you attach these first.
  • Page 4 Attaching end panels and assembling Attaching end panels and assembling tall cabinets with aluminium rails tall cabinets with aluminium sections A good tip for avoiding splitting is If you are installing multiple tall cabinets - first secure these together, then to hold a block on the exit hole.
  • Page 5 Attaching end panels and assembling tall cabinets with Installing a dishwasher as an end aluminium sections cabinet If your dishwasher is to be placed as an end cabinet, note that it must be assembled before you begin shortening the aluminium section under the worktop.
  • Page 6 – base cabinets – tall cabinets If you are making adjustments to your Tinta kitchen, it is vital that you do this If you are attaching adjustments to your tall cabinet, start with the height before shortening the horizontal aluminium piece under the worktop. The and width adjustment pieces first.
  • Page 7 - vertically and horizontally Kvik supplies worktop frames for underneath the worktop in many lengths. Kvik offers a customisable Tinta kitchen with differently-coloured aluminium If none of these fit with the length of the cabinet bodies then it needs to be sections.
  • Page 8 Attaching worktop on base cabinets Supporting worktops – specific placement of MDF joists Be aware of how the worktop is supported, as this can be vital in maintaining its warranty. Use horizontal aluminium sections. B4001. 80 cm – for use with BP00481 Product number: B4001 / B4002 / B4003 / B4004 / B4005 B4002.
  • Page 9 Guide to supports, bar kitchen Guide to supports, cooking island Examples of the placement of supports for worktops (D) and (F). Examples of supports for worktops on a cooking island setup. 60 cm 60 cm 60 cm 80 cm 80 cm 80 cm Guide to supports, corner cabinets Examples of worktop supports on straight corner cabinets U822 / U823 /...
  • Page 10 Composite, granite and Kvik Core When mounting granite, composite and Kvik Core, check the supports after placing the worktop. Look in the cabinet and up under the worktop - if the MDF joists and the worktop are not flush together it needs to be supported with the supplied plastic pieces.

  • Page 12: Warranty

    WARRANTY At Kvik we pride ourselves in developing quality products you can enjoy for years to come. If damage does occur, our warranties are transparent and free of fine print. This is your guarantee that your complaint will be received.
  • Page 13 kvik.dk...