Quad; Camera Setup; Brightness (Ev); Stitching - Datavideo CC-360 Instruction Manual

6.5 Quad

This mode is the quad view display mode allowing free view angle control.
The respective video frame rates are listed as follows:
• 4K(2160p): 10fps
• Full-HD (1080P): 30fps
• HD (720p): 30fps
Note: Images saved in the Global Mode can be displayed in the Standard 360° Mode such as the
YouTube 360° Viewer. You will be allowed to change the view angle freely. In other modes, you
can also change the view angle of live image display but not saved images.

7. Camera Setup

Tap this icon at the bottom left corner to set up the CC-360 APP.

7.1 Brightness (EV)

Change brightness of the target image by tapping the desired EV value.
Note that the image brightness is adjusted depending on settings of the gain value (ISO)
and shutter speed. If both ISO and shutter speed are set to constant values, the EV
option will be disabled. The EV option is enabled only when either ISO or shutter speed is set to
AUTO.

7.2 Stitching

There are three stitching modes available: Manual, Auto One Time and Auto Loop. Tap
change the stitching mode.
Manual
Auto One Time
Auto Loop
When in Manual Stitching Mode, tap this icon to allow the user to manually change the
stitching gap between lenses. Tap the icon to open two sliders as shown in the diagram
below. The exact stitching distances are shown on the right of the respective sliders.
Manual adjustment of stitching gap.
The stitching gap is adjusted automatically once and the
setting remains unchanged regardless.
The stitching gap is constantly being adjusted.
15
to