If you voice dial a contact that contains Wait(s), wait for the appropriate
•
prompt(s) from the number you are calling (credit card number, bank
account number, and so on) and enter the appropriate response(s).
Answering a Call
Incoming
When you receive a call, the phone displays one of the following:
If the caller can be identified, the caller's number (or name if it's in your
•
Contacts) appears in the display.
If the caller cannot be identified, Call from unavailable #, Call from
•
restricted #, or no number appears in the display.
Tip: Assign pictures to Contacts entries. The entry's assigned picture
appears in the display when you receive a call from that entry. (See
"Assigning a Picture to a Contacts Entry" on page 42).
The phone continues to notify you of the call until one of the
following events occur:
You answer the call.
•
The calling party ends the call.
•
The call is sent to voicemail.
•
Call Notification Features
Your phone notifies you of a call in a variety of ways.
Eight ring volume settings: Ringer Off, Vibrate, Low, Low/Medium,
•
Medium, Medium/High, High, or Vibrate/High.
Different ring types or melodies to distinguish callers.
•
Name display with caller ID. (If the caller's name is programmed into
•
your Contacts).
Information about the last 90 each of incoming, missed, and outgoing
•
calls are automatically stored to a call log.
Set Call Ringer Volume
In standby mode, press the Volume key on the right side of
1.
the phone.
Press the Volume key up or down to set the call ringer
2.
volume as desired.
Adjust the Ringer
1.
In standby mode, press the Volume key (
right side of the phone up or down. Options are:
• Ringer Off
• Vibrate
• Low
• Low/Medium
Once you're satisfied with the setting, press
2.
The phone returns to standby mode.
) on the
• Medium
• Medium/High
• High
• Vibrate/High
or
.
OK
Call Functions
24