This operating manual contains all necessary instructions for the installation, commissioning, operation and maintenance of the evaluation board mp6-EVA. The manual is intended to help you achieving optimal results in a short time and shall assist avoiding possible sources of errors. The operating manual of the micropumps and other controllers are available separately.
Page 4
Do not open the housing of the micropump and the controllers. In those cases, Bartels Mikrotechnik cannot issue a guaranty anymore. Please keep this manual safe and give a copy to all users.
DANGER DANGER INDICATES A HAZARD WITH A HIGH LEVEL OF RISK THAT, IF NOT AVOIDED, WILL RESULT IN DEATH OR SERIOUS INJURY. Bartels Mikrotechnik GmbH, Konrad-Adenauer-Allee 11, 44263 Dortmund, Germany www.bartels-mikrotechnik.de, info@bartels-mikrotechnik.de (03.2018) Rev. 2.5 Tel: +49-231-47730-500, Fax: +49-231-47730-501...
2.5 – 5 V voltage source. 3.1 Safety notice The mp6-EVA generates voltages of up to 270 Vpp. All parts of the mp6-EVA evaluation board can carry voltages in this range. Therefore, the board should only be used by qualified personal. Although the output power of the module is very low, proper insulation according to the application conditions needs to be considered by the customer.
More information on the frequency setting with the CLK signal can be found in the mp6-OEM manual. The capacitor C1 can as well be changed by re-soldering, see image “OEM-Behavior 2” in the mp6-OEM manual. Bartels Mikrotechnik GmbH, Konrad-Adenauer-Allee 11, 44263 Dortmund, Germany www.bartels-mikrotechnik.de, info@bartels-mikrotechnik.de (03.2018) Rev. 2.5...
P1 - (negative voltage Piezo 1) Please make sure that the cable can handle voltages up to 270 Vpp and ensure proper insulation of the cable! Bartels Mikrotechnik GmbH, Konrad-Adenauer-Allee 11, 44263 Dortmund, Germany www.bartels-mikrotechnik.de, info@bartels-mikrotechnik.de (03.2018) Rev. 2.5 Tel: +49-231-47730-500, Fax: +49-231-47730-501...
Page 9
Visit our BLOG: http://blog.bartels-mikrotechnik.de Or our YouTube channel: https://www.youtube.com/user/BartelsMikrotechnik You can also find us here: Facebook Twitter Xinq Instagram LinkedIN Tel: +49-231-47730-500 Fax: +49-231-47730-501 Bartels Mikrotechnik GmbH, Konrad-Adenauer-Allee 11, 44263 Dortmund, Germany www.bartels-mikrotechnik.de, info@bartels-mikrotechnik.de (03.2018) Rev. 2.5 Tel: +49-231-47730-500, Fax: +49-231-47730-501...
Need help?
Do you have a question about the mp6-EVA and is the answer not in the manual?
Questions and answers