Turning Your Phone On And Off - Samsung M330 User Manual

Bluetooth Enable – The Bluetooth technology is
active and enabled.
Bluetooth Device Connected – The Bluetooth
device is connected.
Bluetooth Headset Connected – The
Headset is connected and visible.
Bluetooth Hidden – The device is hidden to other
Bluetooth devices and not transmitting its
.
information

Turning Your Phone On and Off

Turning Your Phone On
Press and hold
14 2A. Phone Basics
Other Icons
Bluetooth
for two seconds.
Once your phone is on, it will look for a signal. When
your phone finds a signal, it enters standby mode – the
phone's idle state. At this point, you are ready to begin
making and receiving calls.
If your phone is unable to find a signal after 15 minutes
of searching, a PowerSave feature is automatically
activated. When a signal is found, your phone
automatically returns to standby mode.
In PowerSave mode, your phone searches for a signal
periodically without your intervention. You can also
initiate a search for Sprint service by pressing any key
(when your phone is turned on).
Tip The PowerSave feature conserves your battery
power when you are in an area where there is no
signal.
Turning Your Phone Off
Press and hold
the powering-down animation on the display
screen.
Your screen remains blank while your phone is off
(unless the battery is charging).
for two seconds until you see