Voice Recognition Commands
Call <Name or #> : dials a name from your contact list, or dials a number, even if
•
the number is not stored in the contact list. For more information, refer to
"Contacts List Voice Activation" on page 122.
Send Text <Name> : displays the Create Text Message screen. For more
•
information, refer to "Entering Text" on page 60.
Lookup <Name> : allows you use a voice command to locate and display contact
•
information stored in the Contacts list. For more information, refer to "Using
Contacts List" on page 65.
Go to <App> : accesses the Phonebook, Voice notes, Text messages, Picture
•
message, Call records, t-zones, Calendar, Instant message, and Camera features
of your phone.
Check <Item> : Lets you check your phone's status (that is signal strength, and
•
battery in the same report), battery, signal strength, battery, and My phone
number.
Speak clearly when giving your command. If, after a few seconds, the handset does
not recognize your command, a voice prompt asks you to repeat the command. If the
software does not recognize your command the following message displays "Sorry,
no match found," and voice recognition turns off.
Important!: You must end your current VoiceSignal call before you can make another call.
Voice Recognition Tips
Wait for the tone before you speak.
•
Speak clearly and at a normal volume.
•
Contacts List Voice Activation
On startup VoiceSignal reads your Contacts list and voice-activates all the names.
When you have add or change contacts, VoiceSignal automatically reloads and
voice-activates the list when you add or modify a contact.
Voice Commands
Fun & Apps 122