Table of Contents
Advertisement
Tips for Adapting Digit Dial
Adapt digits in a quiet place.
Make sure you wait for the beep before starting to speak.
Speak clearly, and say each digit distinctly.
If you make a mistake while recording a sequence of
digits, or if there is an unexpected noise that spoils the
recording, rerecord that sequence.
Adapt digit dialing only if you regularly have problems
with digit dialing. Once adapted, digit dialing will not
work as well for other people using your device.
Adapting Digit Dial to Your Voice
1.
Tap the Start menu bar, and then tap Programs.
2.
Tap the VoiceSignal icon.
3.
Tap Settings.
4.
Tap Digit Dialing.
5.
Tap Adapt Digits.
6.
Read the description until you are comfortable to
proceed, and then tap OK. Your device displays the first
digit sequence and "Please say" plays through the
speaker followed by the four digits appearing in the
display.
7.
Wait for the beep and repeat the digits using your
normal tone of voice.
8.
After a moment, the device plays back the recording and
prompts "Did the recording sound ok?" If the recording
was good, say "Yes." If you need to rerecord, say "No."
If you say "No," the device prompts you to say the digits
again. Wait for the beep and then rerecord. Repeat this
step until you're satisfied with the recording.
128
Section 2F: Using the Device's Applications and Tools
Advertisement
Table of Contents
