Table of Contents
Advertisement
Plug the flat end of the Travel Adapter into the Power/
2.
Accessory Interface connector and the other end into a
standard AC wall outlet.
When charging is finished, first unplug the adapter's power
3.
plug from the AC wall outlet and then remove the flat end
from the interface connector jack on the phone.
Warning!: If your device has a touch screen display, please note that a
touchscreen responds best to a light touch from the pad of your
finger or a non-metallic stylus. Using excessive force or a metallic
object when pressing on the touch screen may damage the
tempered glass surface and void the warranty. For more
information, refer to "Standard Limited Warranty" on page 212.
Correct
Incorrect
Note: Failure to unplug the wall charger before you remove the battery, can
cause damage to the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, the battery icon (
warning tone at regular intervals. In this condition, your phone
conserves its remaining battery power, not by turning off the
backlight, but by entering the dimming mode. For a quick check
of your battery level, glance at the battery charge indicator
located in the upper-right corner of your device's display.
When the battery level becomes too low, the phone automatically
turns off.
Switching the Phone On or Off
Press and hold
1.
on.
The phone launches the activation splash screen and then
proceeds to search for the network. Once the network has
been found, you can make or receive calls.
Note: The display language is preset to English at the factory. To change the
language, use the Language menu. For more information, refer to
"Changing Your Settings" on page 52.
) blinks and the device sounds a
or
until the phone switches
Getting Started
9
Hide quick links:
Advertisement
Table of Contents
