Frontgate Amina Gas Table Base Owner's Manual page 4

SAFETY INFORMATION
Only use the regulator and hose assembly provided with this unit. Replacement parts must be supplied
directly by Bond Manufacturing Co., Inc.
Inspect the burner before use of this unit. If the burner shows any kind of damage, do not operate
the appliance.
NOTE: You must follow all steps to properly assemble this heating item. Make sure the gas
valve is turned "OFF" before assembling. Do NOT attempt to assemble without proper tools.
Min. Clearance
48 in (121.9 cm)
Min. Clearance
48 in (121.9 cm)
Min. Clearance
48 in (121.9 cm)
HARDWARE
AA BB
I e t m D e s c i r t p o i n
AA Flat Washer
BB Lock Washer
CC Screw M8*20
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any parts are missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 20 minutes
Tools Required for Assembly (not included): Phillips Screwdriver
Page 4
Min. Clearance
48 in (121.9 cm)
CC
Combustible materials should not be within 72
inches of the top of the unit, or within 48 inches
around the entire unit.
Q y t
3
3
3