Philips Norelco S8950 Manual page 13

Charging with the power cord
1
2
Charging in the SmartClean system (specific types
only)
Charging takes approx. 1 hour. A fully charged
shaver has a shaving time of up to 50 minutes.
Note: You cannot use the shaver while it is
charging.
1 Make sure the product is switched off.
2 Put the small plug in the product and
connect the power plug into any 100V to
240V AC outlet. Use only the power cord
and SmartClean system provided.
The display on the shaver will indicate the
product is charging.
3 After charging, remove the power plug from
the wall outlet and pull the small plug out of
the product.
1 Put the small plug in the back of the
SmartClean system.
2 Put the supply unit in the wall socket.
3 Press to open the SmartClean system cap,
to be able to place the shaver in the holder
('click').
13
English