Cleaning The Click-On Attachments; Cleaning The Beard Styler Attachment - Philips Norelco S8950 Manual

28
English

Cleaning the click-on attachments

Cleaning the beard styler attachment

Each retaining ring has two recesses that fit
exactly into the projections of the shaving
head holder. Turn the ring clockwise until
your hear a click to indicate that the ring is
fixed.
Hold the shaving head holder in your hand
when you reinsert the shaving heads and
reattach the retaining rings. Do not place
the shaving head holder on a surface when
you do this, as this may cause damage.
11 Attach the shaving head holder to the
bottom part of the shaving unit ('click').
Never dry trimmer or beard styler attachments
with a towel or tissue, as this may damage the
trimming teeth.
The accessories supplied may vary for
different products. The box shows the
accessories that have been supplied with your
product.
Clean the beard styler attachment after each
use.
1 Pull the comb off the beard styler
attachment.
Note: Grab the comb in the center to pull it
off the beard styler attachment . Do not pull
at the sides of the comb.