Software Configuration; Login To Configuration Wizard - Software - Fortinet FortiNac BFN620 Installation Manual

Software Configuration

Now that your appliance has been assigned an IP address and is connected to the network, you
are ready to configure your NTP, time zone, routes, and DHCP scopes associated with your
Layer 2 or Layer 3 network.
Use the following buttons and links to navigate through the Configuration Wizard.
• —This is the panel displayed on the left of each Configuration window.
Steps pane
Each step is a link to its corresponding window. It is not required that you follow the
configuration steps sequentially.
• Help —Displays a PDF version of this document.
• Reset —Click Reset to return field values to what they were when you opened the view.
If you move to another window, you can no longer reset field values.
• Summary —Lists all configured settings. You can view a summary at any point in the
configuration process and apply those settings.

Login To Configuration Wizard - Software

1. Bring up a web browser and point it to the IP Address of the FortiNac Server, FortiNac
Control Server or FortiNac Management Server. Use one of the following URLs:
http://<IP Address>:8080/configWizard
http://<Host Name of the appliance>:8080/configWizard
Note: The Configuration Wizard writes files configured on the FortiNac Control Server
to the FortiNac Application Server. No direct configuration of the FortiNac Application
Server is required after the initial basic network setup is completed and it is connected
to the network.
Enter the
2. User Name
an IP address to gain access to the Configuration Wizard.
Click .
3. OK
Click on the License Key screen.
4. OK
Download the documentation needed to configure and administer the product. These
5.
files are in PDF format and require a PDF viewer to read them. Click the
button to save the files, then click
and credentials that you configured when assigning
Password
.
OK
Software Configuration
Download
15