Table of Contents
Advertisement
To Erase All Numbers in Memory
1. Press MENU.
2. Press 0 on the keypad.
3. Enter the lock code.
4. Press 6 to select Clr Memory.
5. To...
Erase
Cancel
6. Press OK.
Result: The screen displays ALL
MEMORIES ARE CLEARED.
38
Note: The lock code is preset to
0000 at factory. For details
changing the Lock Code, see page
63.
Press...
OK
CLR
Adjusting Ringer Volumes
☞ This function is available only in Standby mode.
1. Press MENU.
2. Press 3 on the keypad.
3. Press 1 to select Alert Vol.
4. Press the π or † volume key on the
left side of the phone until you reach
the desired volume level. The volume
can be adjusted up to 4 levels.
Muting the ringing signal can be
activated by choosing OFF.
Result: The screen displays the
selected volume level.
5. Press OK.
39
Advertisement
Table of Contents
