Basic Operation; Wireless Mirroring; Starting Procedure - Pioneer AVIC-W8400NEX Operation Manual

C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
Pioneer MNR.book Page 64 Friday, October 27, 2017 8:13 PM

Basic operation

AV source screen
Hides the touch panel keys.
To display the keys again, touch anywhere on the screen.
64
En

Wireless Mirroring

Wireless Mirroring is a wireless display designed to mirror your mobile device on this
product screen via Wi-Fi connection.

Starting procedure

Wireless Mirroring operations and procedures vary depending on the connected mobile
device. Refer to the instruction manual that came with your mobile device.
CAUTION
For safety reasons, this function is available only when you stop your vehicle in a safe place and apply
the parking brake.
1
Press .
2
Touch then .
3
Touch [Wi-Fi Settings].
4
Confirm that [Wi-Fi] is turned on.
5
Press then touch .
6
Touch [Mirroring].
A connection is configured then the instruction message appears on the display.
NOTES
• When Apple CarPlay or Android Auto with wireless connection is activated, the connection
swtiching confirmation screen appears (Android Auto function is only available for AVIC-
W8400NEX). Touch [Yes] to proceed to Wireless Mirroring.
• When the Wi-Fi connection is set to [OFF], the connection confirmation screen appears. Touch
[Start] to make the connection.
7
Make a Wireless Mirroring connection on the mobile device.
8
Touch [Yes].
The Wireless Mirroring screen appears.
AVIC-W8400NEX/AVIC-W6400NEX
18_Navi_UC_CRI1052(A5_Horizon)