Pioneer AVIC-W8400NEX Operation Manual page 27

C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
Pioneer MNR.book Page 27 Friday, October 27, 2017 8:13 PM
Menu Item Description
[Vehicle] Set the type of vehicle you will be using on the route.
NOTES
• The route is planned based on the selected vehicle type.
• Route planning can also be configured to incorporate
dimension, weight, and freight hazard restrictions for maps that
contain such data. To enhance the route accuracy, correctly
select a vehicle type that is similar to the condition of your
vehicle.
TIPS
• To edit the name and estimated maximum speed of the selected
vehicle profile, touch
• To add a new vehicle profile, touch [Add Profile]. Then select one
of the vehicle types and set the name and estimated maximum
speed.
[Car] • Maneuver restrictions and directional constraints are
taken into account when planning a route.
• Roads are used only if access for cars is allowed.
• Private roads and resident-only roads are used only if they
are inevitable to reach the destination.
[Emergency] • All maneuvers available at intersections are taken into
account.
• Directional constraints are taken into account in the same
way as travel in the opposite direction is allowed at low
speeds.
• Only private roads that need to be used to access the
destination are included.
• Walkways are excluded from routes.
[Bus] • Maneuver restrictions and directional constraints are
taken into account when planning a route.
• Roads are used only if access for buses is allowed.
• Private roads, resident-only roads and walkways are
excluded from routes.
[Taxi] • Maneuver restrictions and directional constraints are
taken into account when planning a route.
• Roads are used only if access for taxis is allowed.
• Private roads, resident-only roads and walkways are
excluded from routes.
Menu Item
[Route Planning Method]
.
[Navigation Mode]
[Highways]
Description
[Truck] • Maneuver restrictions and directional constraints are
taken into account when planning a route.
• Only roads that allow truck access are included.
• Private roads, resident-only roads and walkways are
excluded from routes.
• U-turns are not used in routes (turning around on a
divided road is not considered a U-turn for the purpose of
this system).
Set to change the route planning method. Route
calculation can be optimized for different situations and
vehicle types by changing the planning method.
[Fast] Calculates a route with the shortest travel time to your
destination as a priority. Usually the best selection for fast
and standard cars.
[Easy] Result in a route with fewer turns and no difficult
maneuvers. With this option, you can make this system to
take, for example, the freeway instead of a series of smaller
roads or streets.
[Short] Calculates a route with the shortest distance to your
destination as a priority. Usually practical for slower
vehicles. Rarely practical to use to search for shorter routes
for normal vehicles regardless of the speed.
[Economical] Calculates a route that is quick and saves fuel.
Enable or disable off-road navigation.
[On-road] The route is planned towards the destination along the
roads on the map.
[Off-road] The route is planned towards the destination in a straight
line, not along the roads on the map.
Set to off to avoid prioritizing freeways for calculating the
route.
NOTE
This function is useful when you want to avoid freeways such as
when driving a slow car or towing another vehicle.
AVIC-W8400NEX/AVIC-W6400NEX
18_Navi_UC_CRI1052(A5_Horizon)
27
En