Advertisement
Mobile Gain Antennas
Figure 10. Crimp Tool
Connector Installation (Mini-UHF)
Use Motorola hand tool part #66-80388A26. Refer to
Figure 10. A deluxe rachet type tool is available; order
part #66-80334B40.
1.
Slip the ferrule and collar onto the cable. Refer
to Figure 12.
2.
Prepare the cable to strip dimensions per
Figure 13 which is also marked on the hand-
tool.
4
Figure 11. Model shown is a complete antenna RRA-4935
R R A - 4 9 3 6 i s a m a g n e t i c m o u n t
antenna. It is comprised of antenna
only P/N 01-80356A96, coupling nut
P/N 58-83882B01 and magnetic mount
P/N 01-80355A80. The antenna must
be located at the center of the roof.
3. Insert the stripped cable into the plug body
until the conductor is exposed (front end) and
68P81124E57-A
Connector Installation (Mini-UHF)
NOTE
June, 2000
Advertisement
