HOW TO LOAD FILM
1. Check that frame counter shows "0",
then press back-cover release downward to
open the back cover.
•
Do not load film with wet or sandy hands.
•
Do not load film in places where water,
blowing sand, or dust can enter the camera.
2. Flip up the film-pressure plate. Do not
lift film-pressure plate by pulling on its
spring.
3. Place the film cartridge into the film
chamber as shown above.
CAUTION
•
Load film in subdued light; keep the
camera and film shaded from direct sunlight.
• Before opening the back cover, wipe off
any sand or grit from the outside of the
camera and dry thoroughly.
www.orphancameras.com