Reset; Additional Features; Selecting Base - Samsung DECT-8000 User Manual

5. Enter the new PIN code again to confirm the number, then
press OK button.
Note: If you change the PIN code and then forget it, enter the
default PIN "0000."
6. To return to Standby mode, press

Reset

If you reset the handset, all the user-selectable features
return to the manufacturer's default status.
1. Press MENU to display main menu items.
2. Press ❷ (or #) button repeatedly to choose 5: System,
then press OK button.
3. Enter the PIN code to access the System menu, then press OK
button.
4. Press ❷ (or #) button repeatedly to choose 3: FuncClear,
then press OK button.
5. Press OK button to confirm the selection. Then press
return to Standby mode.
S
52
YSTEM
button.
to

Additional Features

Selecting Base

Your handset can be used with up to four base units. This
menu option allows you to select the base you want to use.
Note: To use the handset with more than one base unit, you
must registered the handset at each base unit. See page
14.
To select a base unit:
1. Press MENU to display main menu items.
2. Press ❷ (or #) button repeatedly to choose 6: Select
Base, then press OK button.
3. Press ❷ (or #) button repeatedly to scroll through the avail-
able bases.
Result: If you choose Best Base, when you are moving around
and lose contact with the base unit, the handset will
automatically find the first available base unit.
4. Press OK button to save the setting. Then press
to Standby mode.
to return
A F
53
DDITIONAL EATURES