Receiving A Call - Samsung DECT-8000 User Manual

You can enter the desired phone number in Standby mode,
and then dial the number. This way of dialing allows you to
make corrections to the number before dialing. Follow these
steps:
1. Enter a telephone number. Check the number in the LCD
window.
Call to
9876
Notes:
• If you make a mistake while entering a number, press C/R
button to clear the last digit and correct the number.
• If you press and hold C/R button for more than one second,
all digits you have entered are cleared and the phone returns
to the Standby mode.
2. When the number appears correctly, press
B F
18
ASIC UNCTIONS
button.

Receiving a Call

When sombody calls you, the phone rings and the
the display blinks.
Call from
Caller's number
1234567
If the caller can be identified, the caller's phone number is
displayed. If the caller cannot be identified, only the
blinks.
1. To answer the call, press
If the handset is on the charger, simply lift it up. You do not
need to press button.
Adams
1234567
Caller's name
Result: You are connected and the
LCD window displays the call time. If the caller name
is currently stored in your internal phonebook, the
caller name displays.
2. You can speak. To end the call, either press
replace the handset on the charger.
Note: button does not work for 3 seconds to prevent the
phone from being disengaged, right after you lift the
phone from the charger to receive the call.
icon on
Blinks
icon
button. Or
Call time
00:05
icon is steadily on. The
button or
B F
ASIC UNCTIONS
19