Table of Contents
Advertisement
• If you need to re-record, say "No."
If you say "No," the phone prompts you to pronounce
the digits again. Wait for the beep and then say the
digits.
Repeat this step until you're satisfied with the recording.
After confirming that the recording sounds "ok",
5.
continue the recording process with the next set of
digits.
After 10 sets of digits, the phone asks whether you want
6.
to do more adaptation. Answer "Yes."
Repeat steps 4 and 5 for another 10 sets of digits. After
7.
the second group of 10 sets of digits, "Adaptation
complete" plays through the speaker and you are
returned to the Digit Dialing menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
In standby mode, press Menu
1.
➔
Settings
Digit Dialing. The following options appear in
the display:
• Adapt Digits
• Reset Digits
Highlight Reset Digits, then press
2.
prompts you to confirm digit reset.
61
➔
➔
Voice SVC
Voice
. The phone
Press OK or
to reset your digit adaptation, or press
3.
Back or
to cancel.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
In standby mode, press Menu
1.
➔
Settings
Sound. The following options appear in the
display:
• Prompts — On/Off — Enables or disables audio prompts.
• Digits — On/Off — Enables or disables digit playback.
• Names — On/Off — Enables or disables name playback.
• Name Settings — Lets you adjust the Speed (Faster or Slower)
and Volume (Louder or Softer) of your phone's audio name
playback.
2.
Highlight the desired option, then press
Highlight the desired setting.
3.
Press OK or
to accept the new setting. Press
4.
to discard the new setting and return to the Voice
Settings menu.
➔
➔
Voice SVC
Voice
.
Advertisement
Table of Contents
