STARFRIT 024300 Instructions For Use And Care Manual page 6

TO USE
1. Pour the desired ingredients in the cup until the MAX line is reached.
NOTE: Cut the fruits/vegetables into small pieces.
2. Attach the desired blade base to the cup. Ensure that the blade is securely tightened
and the gasket is in place.
3. Place the cup assembly onto the motorized base and align the
the blade base with the
the symbol. Make sure the cup is securely locked before operating.
CAUTION: The appliance has a locking mechanism that prevents the appliance from operating
or blade from turning if the cup is not securely attached to the blade base.
4. Plug the appliance into a standard 120-volt AC electrical outlet.
5. Select the desired speed control. Hold the speed control to PULSE for short bursts if
processing ice or frozen fruits/vegetables. For continuous blending, select the LOW
speed ''I'' or HIGH speed '' II ''.
WARNING: Do not operate the appliance for more than two minutes continuously.
6. Turn OFF "O" the appliance and unplug from electrical outlet when done blending.
7. Remove the cup assembly from the motorized base.
8. For immediate consumption, replace the blade base with travel lid.
9. Clean parts and accessories immediately after each use.
Gasket* (Preinstalled)
*Ensure it is properly
installed if removed
Blending blade
Base
Control Knob
6
symbol marked on the base and turn clockwise to align with
Cups
symbol marked on
Grinding blade
To-Go Lids
Power Cord