Table of Contents
Advertisement
1.
Press
Start > Settings > More... > Security
2.
Select
and press
Device Lock
3.
Select "Prompt if device unused for" and press
. (Enabling this option activates the remaining
fields.)
4.
Select each field and enter the required
information:
select the amount of unused time (idle)
Time:
required before you are prompted for a password.
to choose from one of the following
Password type:
PIN types:
must be at least four characters in
Simple PIN:
●
length and cannot contain a simple sequence
such as 000, 1111, or 1234.
Strong alphanumeric:
●
characters in length and must contain at least
one character from each of the following
categories: uppercase/lowercase letters,
numerals, symbols. Examples of strong
alphanumeric passwords are
%$VH5hW
.
.
.
must be at least seven
and
sb?8A!3
use the keypad to enter the desired
Password:
password.
Confirm password:
use the keypad to re-enter the
same password.
5.
Press
(left softkey)
Done
these settings.
Unlocking Your Device Using a Password
Once the preset time has expired, the display screen
will dim and the taskbar
.
Unlock
1.
From standby mode, press
2.
Enter your password using the keypad.
3.
Press
.
Unlock
Changing the Device Lock Code
1.
Press
Start > Settings > More... > Security
2.
Select
and press
Device Lock
3.
Enter your password using the keypad.
4.
Press
.
Unlock
Section 2C. Your Device's Security
(left softkey) to store
> Yes
Start
option is replaced with
.
Unlock
.
.
61
Advertisement
Table of Contents
