Table of Contents
Advertisement
2.
Use both the navigation key and keypad to enter
new values within the date and time fields. See
"Configuring the Time and Date" on page 58..
To toggle between AM and PM, highlight the
●
AM/PM field and then press either
or
(PM) on the keypad.
P
3.
Press
(right softkey) to continue on to the
Next
password setup screen where you can create a
password which must be used to access your
device's features and data. See "Locking Your
Device with a Password" on page 60.
– or –
Skip to step 7 if you do not wish to assign a
password at this time.
4.
Select "Prompt if device unused for" and press
. (Enabling this option activates the remaining
fields.)
5.
Select each field and enter the desired information:
to select the amount of unused time (idle)
Minutes:
required before you are prompted for a password.
to choose from one of the following
Password type:
PIN types:
4
Section 1A. Setting Up Service
●
●
(for AM)
A
Password:
password.
Confirm password:
same password.
6.
Press
7.
From the E-mail screen, press
return to the email account setup process at a later
time, or press
the setup process.
For more information, please see the Set UpYour
Email guide included with your device.
must be at least four characters in
Simple PIN:
length and cannot contain a simple sequence
such as 000, 1111, or 1234.
must be at least seven
Strong alphanumeric:
characters in length and must contain at least
one character from each of the following
categories: uppercase/lowercase letters,
numerals, and symbols. Examples of strong
alphanumeric passwords are
.
%$VH5hW
use the keypad to enter the desired
use the keypad to re-enter the
(left softkey) to store these settings.
Done
(right softkey) to continue with
Next
and
sb?8A!3
(left softkey) to
Skip
Advertisement
Table of Contents
