Table of Contents
Advertisement
Changing the Display Time-Out
Select the length of time the display stays on.
1.
From standby mode, press
Management > Display time out
During standby, the device goes into sleep mode
after a specified period of time to conserve power.
Choose
Never
,
10 seconds
,
1 minute
2 minutes
2.
Press the navigation key left or right to select a new
time-out setting and press
Changing the Brightness
Adjust your screen's brightness to suit your
surroundings.
1.
From standby mode, press
Management > Display brightness
Adjust the brightness level for the display.
Choose Level 1 - Level 5.
2.
Press the navigation key left or right to select a new
level setting and press
46
Section 2B. Your Device's Settings
Start > Settings > Power
.
,
15 seconds
,
30 seconds
,
, or
5 minutes
10 minutes
(left softkey).
Done
Start > Settings > Power
.
(left softkey).
Done
Changing the Keypad Backlight Time-Out
Select the length of time the keypad backlight stays on
when you do not use the keys.
1.
From standby mode, press
Management > Keypad backlight time out
Choose
,
5 seconds
.
2.
Press the navigation key left or right to select a new
time-out setting and press
Restricting the Keypad Backlight Time-Out
By default, the keypad backlight time-out is enabled all
the time. With this setting you can restrict the time of
day that the keypad backlight time-out will be enabled.
For example, if you were planning a day at the beach
(when you would not need the keypad backlight), you
could disable the backlight time-out for that period.
1.
From standby mode, press
Management > Keypad backlight on
Start > Settings > Power
,
,
1 second
2 seconds
3 seconds
, or
10 seconds
.
Done
Start > Settings > Power
.
.
,
,
4 seconds
(left softkey).
Advertisement
Table of Contents
