Cleaning The Generator - Westpro Westinghouse WH3250 Series Service Manual

MAINTENANCE

CLEANING THE GENERATOR

Inspect the generator regularly and clean as required.
Clean All Engine Air Inlet and Outlet Ports – Make
sure all engine air inlet and outlet ports are clean of any
dirt and debris to ensure the engine does not run hot
(see Figure 7-26).
Figure 7-26 – Engine Air Inlet and Outlet Ports
Clean All Engine Cooling Fins – Use a damp rag and
a brush to loosen and remove all dirt on or around the
engine's cooling fi ns (see Figure 7-27).
Figure 7-27 – Engine Cooling Fins
7-12
Clean All Alternator Cooling Air Inlets and Exhaust
Ports – Make sure the cooling air inlets and exhaust
ports of the alternator are free of any debris and
obstructions. Use a vacuum cleaner to remove dirt and
debris stuck in the cooling air inlets and exhaust ports
(see Figure 7-28 and Figure 7-29).
Figure 7-28 – Alternator Cooling Air Inlet and Outlet
Figure 7-29 – Alternator Cooling Air Inlet and Outlet
General Cleaning of the Generator – Use a damp rag
to clean all remaining surfaces.
Port
Port