Preparing For Service; Required Tools; Transporting Generator - Westpro Westinghouse WH3250 Series Service Manual

!
WARNING
ANYONE using or servicing this
generator must read, understand
and follow all safety and operation
instructions provided in this
manual. Failure to closely follow
these instructions can result in
circumstances leading to serious injury
or death, and property damage.

REQUIRED TOOLS

A complete set of standard and metric shop tools is
required to service the generator. Also needed are:
Hammer
Torque wrench
Volt-ohm meter
Frequency meter
Resistive load – such as a load bank, heaters, light
bulbs, etc.
Alternator removal tool
Wooden block (for rotor support)

PREPARING FOR SERVICE

TRANSPORTING GENERATOR

When moving or transporting the generator:
Never drop, strike or place heavy objects on
generator when transporting.
!
WARNING
Hot engine or exhaust system can
cause serious burns or fi res. Let
generator cool completely before
transporting.
Move the engine control switch to the STOP position.
Turn the fuel shutoff valve to the OFF position.
Keep the generator level to prevent fuel spillage.
NOTICE
5-1