Temperature Setting; Manual Operation Or Time Program; Away Setting; Dhw Heating - Bosch EasyControl CT200 Installation And Operating Instructions Manual

Operating the appliance
6.4

Temperature setting

21
20
20
Fig. 14 Temperature setting
▶ Tap on the start screen to get to the temperature setting screen.
▶ Swipe vertically to increase or reduce the set temperature.
6.5

Manual operation or time program

1
Fig. 15 Selecting manual operation or time program
The time program can be set with the EasyControl app. The time program
can be switched on or off with EasyControl.
▶ Swipe horizontally to the correct tab page.
▶ Tap on the Manual operation [1] key or Time program [2] key to
change between these functions.
6.6

Away setting

1
Fig. 16 Selecting "Not at home" or "At home"
The "Away" setting is used to show, whether one is at home or not. The
set temperature is lowered in "Away from home status" by15 °C (60 °F).
This standard value can be changed in the EasyControl app.
This function is only available in time program mode.
▶ Swipe horizontally to the correct tab page.
▶ Tap on the key for "Away" [1] or "Home" [2] to change between these
functions.
8
°C
0
°C
5
°C
0
0010018161-001
2
0010018162-001
2
0010018163-001
6.7

DHW heating

1
Fig. 17 Switching DHW heating on or off and DHW time program
If "DHW according to program" is switched on in the EasyControl app,
the setting for DHW heating can be adjusted on the EasyControl.
Fig. 18 DHW not available
6.8

Settings

Fig. 19 Wi-Fi setting
[1] Wi-Fi settings
[2] Factory settings
[3] Information about the current software version
If a new Wi-Fi network or if the existing network needs to be reset, this
can be done by pressing the Wi-Fi symbol [1]. Follow the steps in
section 5.4 to set up a Wi-Fi network.
▶ Press the trash bin symbol [2] to reset the factory settings.
There are 2 options:
• fully back to the factory settings;
• return to the factory settings while maintaining the consumption
data.
After confirmation, the Wi-Fi data is deleted and must be reset.
Follow the steps in section 5.4 to set up a Wi-Fi network.
6.9

New network password

If the existing network has a new password:
▶ Reset EasyControl ( section 8.1).
▶ Perform the following steps to create a new password
( section 5.5).
2
0010018164-001
3
1
2
3
EasyControl – 6720884199 (2018/01)