Demo/Dimmer Function; Setting The Clock - Samsung MM-G35 User Manual

DEMO/DIMMER function

ENG
All functions available on the system can be viewed on the
display and the display's brightness can be switched between
"on" and "off".
Press the DEMO button.
1
Result: All functions available on the system appear on the front
panel display.
Each of these are explained in detail in this guide. Please refer to the
relevant section.
2 Press the DIMMER button.
Result: The Dimmer function is selected and the display darkens.
3 Press the DIMMER button once again to brighten the front panel
display.
A display brightness control can only be performed while the system
power is on.
8
1
2,3

Setting the Clock

Your system is equipped with a clock which allows you to turn
your system on and off automatically.
You should set the clock:
When you first purchase the micro-compact system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing STANDBY/ON.
2 Press TIMER/CLOCK twice.
Result: CLOCK is displayed.
3
Press PROGRAM/SET.
Result: The hour flashes.
4
To...
Increase the hours
Decrease the hours
5 When the correct hour is displayed, press PROGRAM/SET.
Result: The minutes flash.
6
To...
Increase the minutes
Decrease the minutes
7 When the correct time is displayed, press PROGRAM/SET.
You can display the time, even when you are using another
function, by pressing TIMER/CLOCK once.
You can also use or
of TUNING button or
4,6
4,6
1
Press the TUNING button
Press the TUNING button
buttons on the main unit to instead
in step 4, 6.
2
3,5,7
4,6
4,6