PowerTraveller POWERMONKEY EXPEDITION Quick Start Manuals

POWERMONKEY
EXPEDITION
QUICK START GUIDE
MULTI-POWER
GENERATOR
RUGGED
WATER RESISTANT
5V & 12V CHARGER
powermonkey
solarmonkey
A B
expedition
expedition
battery unit
solar panel
HOW TO CHARGE THE POWERMONKEY EXPEDITION
HAND CRANK
1
Press on/off button to display
level of charge in the battery unit
SOLAR
D
1
Unscrew end blanking cap and attach
end cap with waterproof cable connector
AC MAINS
E
1
Unscrew end blanking cap and attach
end cap with waterproof cable connector
powertraveller.com/expedition
C D
Hand crank Blanking cap
2
Lift crank arm and slot into groove on top
cap. Holding the unit with one hand, begin
turning crank in a forwards direction
2
Connect solar panel to powermonkey
expedition via the waterproof cable
connector using the DC to DC cable
2
Select relevant AC plug head and
connect the mains charger to the unit
via the waterproof cable connector
B
D
E
A
F
End cap
E F
with waterproof
cable connector
3
The green LED shows when hand crank is
producing energy at optimum level. 10 mins
provides 40 mins talk time on iPhone 5S
3
Fully charges expedition battery unit in
12-15 hours in optimum conditions
3
Fully charges expedition battery
unit in 6-8 hours
150mAh
750mAh
10500mAh
6000mAh
5600mAh
G
C
Universal AC
Female
G
in-car socket mains charger