Communication Software; Hardware Setup; Software Installation - Battery Backup Power BBP-AR-2000-PSW-ONL User Manual

7.

Communication Software

7.1 Hardware Setup

1.
Decide whether to use RS-232 communication or USB communication.
optional interface cards please refer to Chapter 8.)
2. Connect a male RS-232 connector or a USB cable* to the UPS
communication port. Connect the female RS-232 connector or the other
end of the USB cable to the computer.
*Note: RS-232 and USB cables are optional.

7.2 Software Installation

Please refer to the software user's manual.
36
(For