Battery Backup Power BBP-AR-2000-PSW-ONL User Manual page 10

Normal Mode LED
Battery Mode LED
Bypass Mode LED
Battery Bad/Weak
LED
Fault LED
Overload LED
Site wiring fault LED
Outlet1 LED
Load LED
Outlet2 LED
1. Solid indicates normal utility voltage. Blinking
indicates insufficient utility voltage for the full load.
Off indicates abnormal utility voltage.
2. In Battery and Load Function Mode indicates
battery capacity is 50%.
1. Indicates load supplied by battery power.
2. In Battery and Load Function Mode indicates
battery capacity is 25%.
1. Indicates load supplied by bypass.
2. In Battery and Load Function Mode indicates
battery capacity is 75%.
1. Indicates low battery power or faulty battery
bank.
2. In Battery and Load Function Mode indicates
battery capacity is 100%.
1. Solid indicates fault or abnormal condition.
2. Blinking indicates LED Panel in Error Code
Function Mode.
1. Indicates UPS is overloaded.
2. In Error Code Function Mode indicates Error
Code 16.
1. Indicates live and neutral lines are connected
wrongly or high neutral-ground voltage.
2. In Battery and Load Function Mode indicates
load capacity is 100%.
3. In Error Code Function Mode indicates Error
Code 8.
1. Indicates UPS Outlets 1 are enabled and ready
to supply loads. (This function is optional.)
2. In Battery and Load Function Mode indicates
load capacity is 75%.
3. In Error Code Function Mode indicates Error
Code 4.
1. Indicates UPS outlets are enabled and ready to
supply loads.
2. In Battery and Load Function Mode indicates
load capacity is 50%.
3. In Error Code Function Mode indicates Error
Code 2.
1. Indicates UPS Outlets 2 are enabled and ready
to supply loads. (This function is optional.)
2. In Battery and Load Function Mode indicates
load capacity is 25%.
3. In Error Code Function Mode indicates Error
Code 1.
9