Dwell Metro Bed Assembly Instructions

METRO BED
EASTERN KING SIZE
Parts and Hardware
1. Headboard
2. Side Rail
3. Footboard
4. Center Support Rail
5. Leg
6. Screw (M8 x 30mm)
7. Screw (M8 x 30mm)
8. Spring Washer
9. Washer
6
17
Assembly Instructions
1- Please unpack all components and check quantity against list above
2- Arrange components as shown in main diagram
3- Position the Headboard and Footboard as shown
4- Attach side rails into the Headboard and Footboard using two bolts on each end and on each side
5- Attach the center leg to the center rail using supplied bolts
6- attach the center rail to the headboard and footboard using supplied bolts
7- Please attach center plastic connectors to the metal center rail
8- Please place the bent wood slats into the center plastic connector and then attach the plastic end cap to the other
end of the slat.
9- Firmly push the plastic end cap into the metal side rail
10- Continue Steps 8-9 until all slats are completed.
1x
2x
1x
2x
4x
16x
8x
8x
8x
8
9
1
4
11
10. Bed Slats
11. Support Legs
12. Center Plastic Connector
13. End Cap
14. Screw
15. Wrench
16. Screw (M8 x 50mm)
17. Allen Key
6
17
2
17
39x
26x
26x
10
13
7
14
15
3
5
16
4x
8x
1x
8x
1x
12
2011/03